 |
 |
 |
 |
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
1960 Molinari boat
 |
Restored Quincy Looper FD-67
 |
This Looper is from the estate sale of Phil Crown (Tx). This motor was in terrible condition. I soaked the pistons for weeks and ended up beating them out of the bore with 2x2 blocks of wood. The rotating guts of the motor were junk. I included a picture of the rusted crankshaft. I only had to replace one piston and Bruce Summers came up with new rings for the 2.455 bore. I replaced the small reed cages with a set of large opening cages and had the 3rd ports included. I also decided to add a Merc650 distributor CD ignition and mounted it to the Quincy base plate I also bought with the motor. I still have to color coat the megaphones, but other than that, the motor is complete and ready to go. Regards, Roger |
FD-67 (2)
 |
FD-67 (3)
 |
FD-67 (4)
 |
FD-67 (5)
 |
FD-67 (6)
 |
FD-67 (7)
 |
FD-67 (8)
 |
Restoration Finished on Quincy Looper FD-67
 |
FD-67 - Before Restoration
 |
FD-67 - Before Restoration (2)
 |
FD-67 - Before Restoration (3)
 |
FD-67 - Rear View
 |
FD-67 - Assorted Looper Parts
 |
FD-67 - Before Restoration (block)
 |
FD-67 - Before Restoration (rod assembly)
 |
FD-67 - Reed Cages
 |
FD-67 - Reed Cages (2)
 |
FD-67 - Block Assembly
 |
FD-67 - Carb Adv Lever
 |
FD-67 - Mag Advance
 |
FD-67 - Mag Cover
 |
FD-67 - Block, back view
 |
FD-67 - Bore View
 |
FD-67 - Megaphone
 |
Alky 30H
 |
Alky 30H - before restoration
 |
Inman Purchase
 |